Section 10: KPulse (for Keithley Pulse Cards)
Model 4200A-SCS Parameter Analyzer Reference Manual
10-10
4200A-901-01 Rev. C / February 2017
Custom Arb file operation: Select and configure waveforms
To select and configure waveforms:
1. Select the
Arb Generator
tab.
2. Select
New Waveform
to open the Waveform Generator dialog box, shown in the following
figure.
Figure 475: Custom Arb file operation: Select and configure waveforms
3. Select the
Waveform Type
to be created.
4. Configure the
Settings
for the selected waveform type.
5. Select
Preview
to update the preview of the waveform.
6. In the
Waveform Name
field, type in a name for the waveform. You cannot use a name that is
already used in the Scratch Pad.
7. Select
OK
to create the waveform. The new waveform is added to the Scratch Pad.
8. Repeat these steps to create another waveform in the Scratch Pad.
