Appendix I: Using a manual or fake prober
Model 4200A-SCS Parameter Analyzer Reference Manual
I-8
4200A-901-01 Rev. C / February 2017
3. Select
Probe Station
.
4. Select
OK
. The KCon navigation displays PRBR1 in the Configuration Navigator and the
properties.
Figure 732: Use KCon to select a prober
5. Select the
Manual Prober
or the
Fake Prober
as the model.
6. Ensure that the
Number of Pins / Positioners
is correct. The number of pins defined here
determines the pins that are available to assign to a switch matrix card column.
7. Select
Save
.
Clarius
Use Clarius to load and run the
probesites
or
probesubsites
project using the new KCon
configuration file, which allows you to execute the project for this prober.
On the 4200A-SCS:
1. Open Clarius.
2. Choose
Select
.
3. Select
Projects
.
4. Search for
probesubsites
.
5. Drag the
probesubsites
project to the project tree.
