Model 4200A-SCS Parameter Analyzer Reference Manual
Appendix F: Set up a probe station
4200A-901-01 Rev. C / February 2017
F-5
Example test execution sequence: probesites project
Configure the probesites project:
1. In Clarius, select
Configure
.
2. In the project tree, select
probesites
.
3. Set the Project Execution Loop Settings as needed for your project. The example below shows
the settings for a project with five sites.
Figure 623: Project Execution Loop Settings
4. Select
Run
.
5. Select
Analyze
to review the data.