Appendix B: Using a Model 590 C-V Analyzer
Model 4200A-SCS Parameter Analyzer Reference Manual
B-18
4200A-901-01 Rev. C / February 2017
C
Output: The measured array of capacitance values
Csize
Set to a value that at minimum is equal to the
Count
; if in doubt, set to 1350
G_or_R
Output:
•
When the parallel measurement model (
1
) is selected,
G_or_R
is the
measured conductance
•
When the series measurement model (
0
) is selected, this is the measured
resistance
G_or_Rsize
Set to a value that at minimum is equal to the
Count
; if in doubt, set to 1350
T
The array of time stamps for each measurement step
Tsize
Set to a value that at minimum is equal to the
Count
; if in doubt, set to 1350
Details
This user module performs a capacitance versus time (Ct) sweep. The figure below shows the default
parameters for the
ctsweep-590
UTM, which uses the
CtSweep590
user module.
Figure 562: Starting KULT
