Appendix J: Using a Cascade Summit-12000 Prober
Model 4200A-SCS Parameter Analyzer Reference Manual
J-20
4200A-901-01 Rev. C / February 2017
3. Select
Probe Station
.
4. Select
OK
. The KCon navigation displays PRBR1 in the Configuration Navigator and the
properties.
Figure 776: Use KCon to select a prober
5. Select the Cascade prober as the model.
6. Make sure the
Number of Pins / Positioners
is correct. The number of pins defined here
determines the pins that are available to assign to a switch matrix card column.
7. Select
Save
.
8. Exit KCon.
Clarius
Use Clarius to load and run the
probesites
project using the new KCon configuration file, which
allows you to execute the project for this prober.
On the 4200A-SCS:
1. Open Clarius.
2. Choose
Select
.
3. Select
Projects
.
4. Search for
probe
.
5. Drag the
probesites
project to the project tree.
