Appendix K: Using a Signatone CM500 Prober
Model 4200A-SCS Parameter Analyzer Reference Manual
K-2
4200A-901-01 Rev. C / February 2017
Set up communications
The Signatone CM500 prober is configured for GPIB communications only. Make sure the prober
configuration is set up properly for the GPIB communications interface.
To set up communications:
1. Double-click the
CM500
icon on the Windows desktop. The prober initializes the wafer XY stage,
theta, and Z chuck.
Figure 789: CM500 icon
Figure 790: CM500 Setup GPIB screen
2. Select the
Utility
menu and run the
Remote Host Interface
command.
Figure 791: Select Host Interface
3. Select the
IEEE488
Host Interface. The Signatone GPIB driver window opens.
Figure 792: Signatone GPIB driver window
