Maintenance 8. Trouble Shooting
RC180 Rev.17
180
PC
No.
Message
Remedy
Note 1
Note 2
1800
The controller is already connected to
a PC.
Only one PC can be connected to the
controller.
1802
The command was attempted without
being connected to a controller.
1803
Failed to read or write the file on the
PC.
1804
Initialization failure. Failed to allocate
memory on the PC.
1805
Connection failure. Check the
controller startup and connection of
the communication cable.
1806
Timeout during connection via
Ethernet.
1807
Timeout during connection via USB.
1808
USB driver is not installed.
Failed to install EPSON RC+ 5.0.
Install EPSON RC+ 5.0 again.
1851
Unsupported. Unsupported command
was attempted.
1852
System error. Uncommon error.
1.
Reboot the EPSON RC+5.0.
2.
Reboot the PC.
3.
Reinstall the EPSON RC+ 5.0.
Summary of Contents for RC180
