Epson RC180 Manual Download Page 140

Page: 140 / 264

Maintenance 4. Backup and Restore

128

RC180 Rev.17

4.3.2 Backup from the Teach Pendant TP1 (Option)

Backs up system files in the Controller to USB memory. (Only TP1. TP2 does not

support this function.)

(1)

Insert the USB memory into the Controller.

(2)

In the [Programming] screen, move the cursor to [System Backup…], and press the

<OK> key. The following screen appears.

Enter the file name.

(3)

Press the <Enter> key. The following screen appears.

<OK>

When the <OK> key is pressed without specifying a folder, the backup files are

stored in a subfolder of the USB memory root folder.

(4)

Press the <F2> key. The following screen appears.

Specify the folder to save the backup data.

Summary of Contents for RC180








































































































































































































































































Search results

Summary of Contents for RC180

Reviews:

Related manuals for RC180

Brands by name

Popular brands

Epson RC180, Manual

Search results

Summary of Contents for RC180

Reviews:

Related manuals for RC180

Brands by name

Popular brands