Epson RC180 Manual Download Page 54

Page: 54 / 264

Setup & Operation 6. Memory Port

RC180 Rev.17

6.3.3 Load Data with EPSON RC+ 5.0

The following shows the procedure to read the data stored in the USB memory by EPSON

RC+ 5.0 and display the Controller status.

(1)

Insert the USB memory into the PC with EPSON RC+ 5.0.

(2)

Make sure that the following folder is indicated in the USB memory.

S_ serial number_data status was saved

→

Exmaple: S_12345_200608074410

(3)

Copy the folder confirmed in procedure (2) to the “\EpsonRC50\Status” folder.

(4)

Select the EPSON RC+ 5.0 menu-[Tools]-[Controller] to display the [Controller

Tools] dialog.

(5)

Click the <Export Controller Status…> button.

(6)

[Browse For Folder] dialog appears. Select the folder copied in procedure (3) and

click the <OK> button.

Summary of Contents for RC180








































































































































































































































































Search results

Summary of Contents for RC180

Reviews:

Related manuals for RC180

Brands by name

Popular brands

Epson RC180, Manual

Search results

Summary of Contents for RC180

Reviews:

Related manuals for RC180

Brands by name

Popular brands