Epson RC180, Manual

Page: 213 / 264

Maintenance 8. Trouble Shooting
RC180 Rev.17 201
Parser
No. Message Remedy Note 1 Note 2
3000
OBJ file size is large. TP1 may not
be able to build this project.
When it is necessary to build the project
from TP1, consider to reduce the
program.
3050 Main function is not defined. Declare a Main function.
3051 Function does not exist. Declare an unresolved function.
3052 Variable does not exist. Declare an unresolved variable.
3100 Syntax error. Correct the syntax error.
3101 Parameter count error.
The number of parameters is excess or
deficiency. Correct the parameters.
3102
File name length is beyond the
maximum allowed.
Shorten the file name.
3103 Duplicate function definition. Change the function name.
3104 Duplicate variable definition ‘ ** ’. Change the variable name.
3105
Global and Global Preserve variables
cannot be defined inside a function
block.
Declare the Global and Global Preserve
variables outside the function block.
3106 An undefined function was specified. Specify a valid function name.
3107
Both While and Until for Do...Loop
was specified.
The While/Until statement is specified
for both Do statement and Loop
statement. Delete either While/Until
statement.
3108
Specified line number or label ‘ ** ’
does not exist.
Set the line label.
3109 Overflow error.
The direct numerical specification
overflows. Reduce the numeric value.
3110
An undefined variable was specified
‘ ** ’. There is an undefined variable. Declare
the variable.
3111
Specified variable is not an array
variable.
Specify the array variable.
3112
Cannot change the dimensions of the
array variable.
Dimension of the array cannot be
changed in Redim statement during the
run time. Correct the program.
3114
Specified Next variable does not
match the specified For variable.
Correct the variable name.
3115
Cannot use a point expression in the
first argument.
Specify a single point for the point flag
setting. Do not specify a point
expression.
3116
Array number of dimensions does not
match the declaration.
Check the number of array dimensions.
3117 File cannot be found.
The file that configures the project
cannot be found. Check the project
folder if the file exists.
3118 Corresponding EndIf cannot be found.
The number of EndIf statements that
correspond to If and ElseIf statements is
not enough. Add the EndIf statements.
3119 Corresponding Loop cannot be found.
The number of Loop statements that
correspond to Do statements is not
enough. Add the Loop statements.
3120 Corresponding Next cannot be found.
The number of Next statements that
correspond to For statements is not
enough. Add the Next statements.