Epson RC180 Manual Download Page 57

Page: 57 / 264

Setup & Operation 7. LAN (Ethernet Communication) Port

RC180 Rev.17

7. LAN (Ethernet Communication) Port

- Refer to

EPSON RC+ 5.0 User’s Guide 5.12.1 PC to Controller Communications

Command (Setup Menu)

for other details for the development PC and Controller

connection.

- For Ethernet (TCP/IP) communication with robot application software, refer to

EPSON

RC+ 5.0 Online Help

User’s Guide 12. TCP/IP Communications

- Refer to

Vision Guide 5.0

manual for other details of connection of the Controller and

CV1.

- This port is not used for EtherNet/IP. Use the port for fieldbusI/O board. For other

details, refer to

Setup & Operation 12.3.7 EtherNet/IP

7.1 About the LAN (Ethernet Communication) Port

Ethernet communication port supports 100BASE-TX / 10 BASE-T.

This port is used for three different purposes.

Connection with development PC

LAN (Ethernet communication) port is used for connection of the Controller and the

development PC.

Equivalent operation is available to connect between the Controller and the

development PC with the development PC connection port.

(Refer to

Setup & Operation 5. Development PC Connection Port

)

Connection with other Controller or PC

The LAN (Ethernet communication) port can be used as an Ethernet (TCP/IP)

communication port to communicate between multiple controllers from robot

application software.

Connection with CV1

The LAN (Ethernet communication) port is used for connection of the Controller and

CV1.



NOTE

Summary of Contents for RC180








































































































































































































































































Search results

Summary of Contents for RC180

Reviews:

Related manuals for RC180

Brands by name

Popular brands

Epson RC180, Manual

Search results

Summary of Contents for RC180

Reviews:

Related manuals for RC180

Brands by name

Popular brands