Epson RC180, Manual

Page: 191 / 264

Maintenance 8. Trouble Shooting
RC180 Rev.17 179
Operator Panel
No. Message Remedy Note 1 Note 2
1600
Initialization failure. Failed to
initialize OP.
1603
Timeout error occurred during
communication with OP. Check whether the cable is firmly
connected.
Replace the cable.
1604
Parity error occurred during
communication with OP. Check whether the cable is firmly
connected.
Replace the cable.
1605
Framing error occurred during
communication with OP. Check whether the cable is firmly
connected.
Replace the cable.
1606
Overrun error occurred during
communication with OP. Check whether the cable is firmly
connected.
Replace the cable.
1607
Checksum error occurred during
communication with OP. Check whether the cable is firmly
connected.
Replace the cable.
1608
Retry error occurred during
communication with OP. Check whether the cable is firmly
connected.
Replace the cable.
1609
OP cannot be connected. Upgrade the controller software.
Upgrade the OP firmware.
Teach Pendant
No. Message Remedy Note 1 Note 2
1700
Initialization failure. Failed to
initialize TP.
1701
Initialization failure. Failed to
initialize TP.
1702
Initialization failure. Failed to
initialize TP.
1703
File failure. Failed to read the screen
data file.
1704
Failed to read the setting file.
1706
Failed to open the TP port.
1708
Failed to read the key table for TP.
1709
Failed to change the language.
1710
Failed to make the screen.