Epson RC180 Manual Download Page 28

Page: 28 / 264

Setup & Operation 2. Part Names and Functions

RC180 Rev.17

(18) LAN (Ethernet communication) port

This port connects the Controller and the Development PC using an Ethernet cable.

100BASE-TX / 10BASE-T communication are available.

For details, refer to

Setup & Operation 7. LAN (Ethernet communication) Port

(19) Memory port

This port connects the common USB memory for Controller status storage function.

Do not connect other USB devices except the USB memory.

For details, refer to

Setup & Operation 6. Memory Port

(20) Trigger Switch

This switch is for Controller status storage function using the USB memory.

For details, refer to

Setup & Operation 6. Memory Port.

(21) TP/OP port

Connects Teach Pendant TP1 (Option) TP2 (Option), Operator Panel OP1 (Option),

and TP/OP bypass plug.

For details, refer to

Setup & Operation 8. TP/OP Port

Do not connect the following to the TP/OP port of RC180. Connecting to the

followings may result in malfunction of the device since the pin assignments are

different.

OPTIONAL DEVICE dummy plug
Operation Pendant OP500
Operator Pendant OP500RC
Jog Pad JP500
Teaching Pendant TP-3**

(22) I/O connector

This connector is used for input/output device. There are 24 inputs and 16 outputs.

For details, refer to

Setup & Operation 10. I/O Connector

(23) Battery

This is a lithium battery for data backup.

For replacement, refer to

Maintenance 6.2 Battery

(24) ProSix Driver Unit

This unit is used for C3 series and S5 series manipulators.

Motor driver for two axes is installed.



NOTE

Summary of Contents for RC180








































































































































































































































































Search results

Summary of Contents for RC180

Reviews:

Related manuals for RC180

Brands by name

Popular brands

Epson RC180, Manual

Search results

Summary of Contents for RC180

Reviews:

Related manuals for RC180

Brands by name

Popular brands