Serial port
Configure Remote Access mode
LR54 User Guide
218
7. Click to expand
Data Framing
.
a. Click
Enable
to enable the data framing feature.
b. For
Maximum Frame Count
, enter the maximum size of the packet. The default is
1024
.
c. For
Idle Time
, enter the length of time the device should wait before sending the packet.
d. For
End Pattern
, enter the end pattern. The packet is sent when this pattern is received
from the serial port.
e. Click
Strip End Pattern
if you want to remove the end pattern from the packet before it is
sent.
8. Expand
Service Settings
.
All service settings are disabled by default. Click available options to toggle them to enabled,
and set the IP ports as appropriate.
For each type of service, you can also configure the access control.
To do this, you need to go to
Device Configuration
:
a. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
b. Access the configuration for the appropriate type of service:
i. Click to expand
Serial
.
ii. Click to expand the appropriate serial port.
iii. Click to expand the appropriate type of service.
iv. Click to expand
Access Control List
.
For example, to set the Access Control List for the SSH connection for serial port 1, click to
expand
Serial
>
Port 1
>
SSH connection
>
Access Control List
:
