Hotspot
Hotspot configuration
LR54 User Guide
323
6. Change the default SSID, Digi Hotspot, to your preferred value.
7. Click
Apply
to save the configuration and apply the change.
Command line
1. Select the device in Remote Manager and click
Actions
>
Open Console
, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
admin
to access the Admin CLI.
2. At the command line, type
config
to enter configuration mode:
> config
(config)>
3. Change the SSID for
digi_hotspot_ap1
to your preferred value:
(config)> network wifi ap digi_hotspot_ap1 ssid
value
where
value
is a string of 1 to 32 characters. If the value contains spaces, enclose in quote
marks (
"
).
4. Change the SSID for
digi_hotspot_ap2
to your preferred value:
(config)> network wifi ap digi_hotspot_ap1 ssid
value
where
value
is a string of 1 to 32 characters. If the value contains spaces, enclose in quote
marks (
"
).
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
6. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
