Serial port
Configure Remote Access mode
LR54 User Guide
222
8. Set the type of parity used by the device to which you want to connect:
(config)>serial port parity
parity
(config)>
Allowed values are:
n
even
n
odd
n
none
The default is
none
.
9. Set the stop bits used by the device to which you want to connect:
(config)>serial port stopbits
bits
(config)>
10. Set the type of flow control used by the device to which you want to connect:
(config)>serial port flow
value
(config)>
where value is one of:
n
none
n
rts/cts
n
xon/xoff
11. Configure the session settings.
a. Set the characters used to start an escape sequence:
(config)>serial port1 escape
string
(config)
If no characters are defined, the escape sequence is disabled. The default is
~b
.
b. Limit access to the serial port to a single active session:
(config)>serial port1 exclusive true
(config)
c. Set the number of bytes of output from the serial port that are written to buffer. These
bytes are redisplayed when a user connects to the serial port.
(config)>serial port1 history
bytes
(config)
The default is
4000
bytes.
d. Set the amount of time to wait before disconnecting due to user inactivity:
(config)>serial port1 idle_timeout
value
(config)
where
value
is any number of weeks, days, hours, minutes, or seconds, and takes the
format
number
{
w|d|h|m|s
}.
