Command line interface
Configuration mode
LR54 User Guide
1066
1. Display current authentication method by using the
show
command:
(config)> show auth method
0 local
(config)>
2. Add an authentication method by using the
add
index_item
command. For example:
n
To add the authentication method to the beginning of the list, use the index
number
0
:
(config)> add auth method 0
(config)> show auth method
0
1 local
(config)>
n
To add the authentication method to the end of the list, use the
end
keyword:
(config)> add auth method end
(config)> show auth method
0 local
1
(config)>
The end keyword
As demonstrated above, the
end
keyword is used to add an element to the end of a list. Additionally,
the
end
keyword is used to add an element to a list that does not have any elements.
For example, to add an authentication group to a user that has just been created:
1. Use the
show
command to verify that the user is not currently a member of any groups:
(config)> show auth user new-user group
(config)>
2. Use the
end
keyword to add the admin group to the user's configuration:
(config)> add auth user new-user group end admin
(config)>
3. Use the
show
command again to verify that the admin group has been added to the user's
configuration:
(config)> show auth user new-user group
0 admin
(config)>
Delete elements from a list
When used with parameters that contains lists of elements, the
del
command is used to delete an
element in the list.
For example, to delete an authentication method:
