Monitoring
Enable the Wi-Fi scanner
LR54 User Guide
965
a. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
Monitoring
>
Wi-Fi scanner
.
4. Click
Enable
.
5. (Optional) For
Channels
, type the Wi-Fi channels that will be scanned by this instance of the
service.
Allowed value is a comma-separated list of channel numbers, or
all
to scan all channels. The
default is
all
.
6. (Optional) For
Hop frequency
, type the frequency, in milliseconds, that the Wi-Fi scanner will
hop from one channel to the next during scanning.
Allowed values are any number of seconds or milliseconds, and take the format
number
{
s|ms
}.
For example, to set
Hop frequency
to one second, enter
1s
or
1000ms
.
The default is
150ms
, and the maximum is
10000ms
(
10s
).
7. (Optional) For
Update interval
, type the number of seconds between scans.
Allowed values are any number of hours, minutes, or seconds, and take the format
number
{
h|m|s
}.
For example, to set
Update interval
to ten minutes, enter
10m
or
600s
.
The default is
15
seconds.
8. (Optional) Click
Secondary antenna
to disable the use of the secondary Wi-Fi antenna.
