Interfaces
Bridging
LR54 User Guide
207
4. For
Add Bridge
, type a name for the bridge and click
.
5. Bridges are enabled by default. To disable, toggle off
Enable
.
6. Add devices to the bridge:
a. Click to expand
Devices
.
b. For
Add device
, click
.
c. Select the
Device
.
d. Repeat to add additional devices.
Note
The MAC address of the bridge is taken from the first available device in the list.
7. (Optional) Enable Spanning Tree Protocol (STP).
STP is used when using multiple LANs on the same device, to prevent bridge loops and other
routing conflicts.
a. Click
STP
.
b. Click
Enable
.
c. For
Forwarding delay
, enter the number of seconds that the device will spend in each of
the listening and learning states before the bridge begins forwarding data. The default is
2
seconds.
8. Click
Apply
to save the configuration and apply the change.
