User authentication
User authentication methods
LR54 User Guide
778
4. For
Add Method
, click
.
5. Select the appropriate authentication type for the new method from the
Method
drop-down.
Note
Authentication methods are attempted in the order they are listed until the first
successful authentication result is returned. See
Rearrange the position of authentication
for information about how to reorder the authentication methods.
6. Repeat these steps to add additional methods.
7. Click
Apply
to save the configuration and apply the change.
Command line
Authentication methods are attempted in the order they are listed until the first successful
authentication result is returned. This procedure describes how to add methods to various places in
the list.
1. Select the device in Remote Manager and click
Actions
>
Open Console
, or log into the LR54
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
admin
to access the Admin CLI.
2. At the command line, type
config
to enter configuration mode:
> config
(config)>
3. Add the new authentication method to the appropriate location in the list:
n
To determine the current list of authentication methods:
a. Select the device in Remote Manager and click
Actions
>
Open Console
, or log into
the LR54 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access
selection menu
. Type
admin
to access the Admin CLI.
b. At the command line, type
config
to enter configuration mode:
> config
(config)>
c. Use the
show auth method
command to display the current authentication
methods configuration:
