Routing
Virtual Router Redundancy Protocol (VRRP)
LR54 User Guide
428
5. Click
Enable
.
6. For
Interface
, select
Interface: LAN1
.
7. For
Router ID
, leave at the default setting of
50
.
8. For
Priority
, type
80
.
9. Click to expand
Virtual IP addresses
.
10. Click
to add a virtual IP address.
11. For
Virtual IP
, type
192.168.3.3
.
Task 2: Configure VRRP+ on device two
1. Click to expand
VRRP+
.
2. Click
Enable
.
3. Click to expand
Monitor interfaces
.
4. Click
to add an interface for monitoring.
5. Select
Interface: WWAN
.
6. Click to enable
Monitor VRRP+ master
.
7. For
Priority modifier
, type
30
.
Task 3: Configure the IP address for the VRRP interface, LAN1, on device two
1. Click
Network
>
Interfaces
>
LAN1
>
IPv4
2. For
Address
, type
192.168.3.2/24
.
3. For
Default gateway
, type the IP address of the VRRP interface on the master device,
configured above in
(
192.168.3.1
).
