Services
Configure telnet access
LR54 User Guide
613
Where
value
can be:
l
A single IP address or host name.
l
A network designation in CIDR notation, for example, 2001:db8::/48.
l
any
: No limit to IPv6 addresses that can access the telnet service.
Repeat this step to list additional IP addresses or networks.
n
To limit access to hosts connected through a specified interface on the LR54 device:
(config)> add service telnet acl interface end
value
(config)>
Where
value
is an interface defined on your device.
Display a list of available interfaces:
Use
... network interface ?
to display interface information:
(config)> ... network interface ?
Interfaces
Additional Configuration
-------------------------------------------
defaultip
Default IP
defaultlinklocal
Default Link-local IP
lan1
LAN1
loopback
Loopback
wan1
WAN1
wwan
WWAN
(config)>
Repeat this step to list additional interfaces.
n
To limit access based on firewall zones:
(config)> add service telnet acl zone end
value
(config)>
Where
value
is a firewall zone defined on your device, or the
any
keyword.
Display a list of available firewall zones:
Type
... firewall zone ?
at the config prompt:
(config)> ... firewall zone ?
Zones: A list of groups of network interfaces that can be
referred to by packet
filtering rules and access control lists.
Additional Configuration
--------------------------------------------------------
