Firewall
Configure Quality of Service options
LR54 User Guide
880
The quality of service binding configuration window is displayed.
5.
Enable
the binding.
6. (Optional) Type a
Label
for the binding.
7. Select an
Interface
to queue egress packets on. The binding will only match traffic that is
being sent out on this interface.
8. (Optional) For
Interface bandwidth (Mbit)
, set the maximum egress bandwidth of the
interface, in megabits, allocated to this binding. Typically, this should be 95% of the available
bandwidth. Allowed value is any integer between
1
and
1000
.
9. Create a policy for the binding:
At least one policy is required for each binding. Each policy can contain up to 30 rules.
a. Click to expand
Policy
.
b. For
Add Policy
, click
.
The QoS binding policy configuration window is displayed.
New QoS binding policies are enabled by default. To disable, toggle off
Enable
.
c. (Optional) Type a
Label
for the binding policy.
d. For
Weight
, type a value for the amount of available bandwidth allocated to the policy,
relative to other policies for this binding.
The larger the weight, with respect to the other policy weights, the larger portion of the
maximum bandwidth is available for this policy. For example, if a binding contains three
policies, and each policy contains a weight of 10, each policy will be allocated one third of
the total interface bandwidth.
e. For
Latency
, type the maximum delay before the transmission of packets. A lower latency
means that the packets will be scheduled more quickly for transmission.
