Firmware configuration
Use the local REST API to configure the LR54 device
LR54 User Guide
45
Use the GET method to return device configuration information
To return device configuration, issue the
GET
method. For example, using
curl
:
$ curl -k -u admin https://
ip-address
/cgi-bin/config.cgi/value/
path
-X GET
where:
n
ip-address
is the IP address of the LR54 device.
n
path
is the path location in the configuration for the information being returned.
To determine allowed values for
path
from the Admin CLI:
1. Select the device in Remote Manager and click
Actions
>
Open Console
, or log into the
LR54 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access
selection menu
. Type
admin
to access the Admin CLI.
2. At the command line, type
config
to enter configuration mode:
> config
(config)>
3. At the config prompt, type
?
(question mark):
(config)> ?
auth
Authentication
cloud
Central management
firewall
Firewall
monitoring
Monitoring
network
Network
serial
Serial
service
Services
system
System
vpn
VPN
(config)>
The allowed values for
path
are listed in the first (left) column.
4. To determine further allowed path location values by using the
?
(question mark) with
the path name:
(config> service ?
Services
Additional Configuration
-------------------------------------------------------------------
------------
dns
DNS
iperf
IPerf
location
Location
mdns
Service Discovery (mDNS)
modbus_gateway
Modbus Gateway
