D-Link DES-3326SRM, Command Line Interface Reference Manual

Page: 84 / 354

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
84 Network Management Commands
show snmp host
Purpose Used to display the recipient of SNMP traps
generated by the switch
’ s SNMP agent.
Syntax show snmp host {<ipaddr>}
Description The show snmp host command is used to
display the IP addresses and configuration
information of remote SNMP managers that
are designated as recipients of SNMP traps
that are generated by the switch
’ s SNMP
agent.
Parameters
<ipaddr>
−
The IP address of a remote SNMP
manager that will receive SNMP traps
generated by the switch
’ s SNMP agent.
Restrictions None.
Example Usage:
To display the currently configured SNMP hosts on the switch:
DES-3326SR:4#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address SNMP Version Community Name
--------------- --------------------- ------------------------------
10.48.76.23 V2c private
10.48.74.100 V3 authpriv public
Total Entries: 2