D-Link DES-3326SRM, Command Line Interface Reference Manual

Page: 335 / 354

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
OSPF Configuration Commands 335
config ospf virtual_link
Purpose Used to configure the OSPF virtual
interface settings.
Syntax config ospf virtual_link <area_id>
<neighbor_id> {hello_interval
<sec>/dead_interval
<sec>/authentication [simple
<password>/md5 <key_id>/none]}
Description This command is used to configure the
OSPF virtual interface settings.
Parameters
<area_id>
−
A 32-bit number in the form of
an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the
OSPF domain.
<neighbor_id>
−
The OSPF router ID for
the remote area. This is a 32-bit number
in
the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies
the remote area
’ s Area Border Router.
hello_interval <sec>
−
Allows the
specification of the interval between the
transmission of OSPF Hello packets, in
seconds. Between 5 and 65535 seconds
can be specified. The Hello Interval, Dead
Interval,
Authorization Type, and
Authorization Key should be the same for
all routers on the same network.
dead_interval <sec>
−
Allows the
specification of the length of time between