D-Link DES-3326SRM, Command Line Interface Reference Manual

Page: 14 / 354

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
14 Using the Console CLI
•
VT-100/ANSI compatible
•
9,600 baud
•
8 data bits
•
No parity
•
One stop bit
•
No flow control
You can also access the same functions over a Telnet interface.
Once you have set an IP address for your Switch, you can use a
Telnet program (in VT-100 compatible terminal mode) to access
and control the Switch. All of the screens are identical, whether
accessed from the console port or from a Telnet interface.
After the switch reboots and you have logged in, the console looks
like this:
Fig. 2- 1. Initial Console Screen
Commands are entered at the command prompt, DES-3326SR:4#.
There are a number of helpful features included in the CLI.
Entering the ? command will display a list of all of the top-level
commands.