D-Link DES-3326SRM, Command Line Interface Reference Manual

Page: 223 / 354

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
Route Redistribution Commands 223
Example Usage:
To add route redistribution settings:
DES-3326SR:4#create route redistribute dst ospf src rip
Command: create route redistribute dst ospf src rip
Success.
DES-3326SR:4#
create route redistribute dst rip
Purpose Used to add route redistribution settings for
the exchange of OSPF routes to RIP routes
on the switch.
Syntax create route redistribute dst rip src
[local/static/ospf
{all/internal/external/type_1/type_2}]
{metric <value>}
Description This command will redistribute routing
information between the OSPF and Rip
routing protocols to all routers on the
network that are running OSPF or RIP.
Routing information entered into the Static
Routing Table on the local DES-3326SR
switch is also redistributed
Parameters src [static/ospf
{all/internal/external/type_1/type_2}]
−
Allows the selection of the protocol of the
source device.
dst
−
Allows the selection of the protocol of