D-Link DES-3326SRM Page 65 Command Line Interface Reference Manual Download

Page: 65 / 354

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual

Network Management Commands

DES-3326SR:4#

create snmp view

Purpose

Used to assign views to community strings
to limit which MIB objects and SNMP
manager can access.

Syntax

create snmp view <view_name 32> <oid>
view_type [included/excluded]

Description

The create snmp view assigns views to
community strings to limit which MIB
objects an SNMP manager can access.

Parameters

<view_name 32>

−

An alphanumeric string

of up to 32 characters that identifies the
SNMP view that will be created.

<oid>

−

The object ID that identifies an

object tree (MIB tree) that will be included
or excluded from access by an SNMP
manager.

included

−

Include this object in the list

of objects that an SNMP manager can
access.

excluded

−

Exclude this object from the

list of objects that an SNMP manager
can access.

Restrictions

Only administrator-level users can issue
this command.

Summary of Contents for DES-3326SRM



































































































































































































































































































































































Search results

Summary of Contents for DES-3326SRM

Reviews:

Related manuals for DES-3326SRM

Brands by name

Popular brands

D-Link DES-3326SRM, Command Line Interface Reference Manual

Search results

Summary of Contents for DES-3326SRM

Reviews:

Related manuals for DES-3326SRM

Brands by name

Popular brands