D-Link DES-3326SRM, Command Line Interface Reference Manual

Page: 51 / 354

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
Switch Port Commands 51
show ports
Purpose Used to display the current configuration of
a range of ports.
Syntax show ports {<portlist>}
Description This command is used to display the
current configuration of a range of ports.
Parameters
<portlist>
−
Specifies a range of ports to be
configured. The port list is specified by
listing the beginning port number and the
highest port number of the range. The
beginning and end of the port list range are
separated by a dash. For example, 3 would
specify port 3. 4 specifies port 4. 3-4
specifies all of the ports between port 3 and
port 4
−
in numerical order.
Restrictions none.
Example Usage:
To display the configuration of the ports 1-7 of module 1:
DES-3326SR:4#show ports 1-7
Port Port Settings Connection Address
State Speed/Duplex Speed/Duplex Learning
---- -------- --------------------- --------------------- -----------
1 Enabled Auto Link Down Enabled
2 Enabled Auto Link Down Enabled
3 Enabled Auto Link Down Enabled
4 Enabled Auto Link Down Enabled