Cisco Catalyst 2960 Series, Configuration Manual

Page: 1985 / 2288

Event_reqinfo
"event_ID %u event_type %u event_pub_sec %u event_pub_msec %u event_severity %u" "group_name %u
operation_id %u condition %u reaction_type %u dest_ip_addr %u" "threshold_rising %u threshold_falling%u
measured_threshold_value %u" "threshold_count1 %u threshold count2 %u"
Description Event Type
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id.
event_id
The type of event to monitor for the create, update,
and delete flow. event_type
An ASCII string that represents the name of the event
for this event type. event_type_string
The time, in seconds and milliseconds, when the event
was published to the EEM. event_pub_sec event_pub_msec
The severity of the event. event_severity
The name of theIPSLA group. group_name
The IPSLA operation ID. operation_id
The condition of IPSLA, which can be one of the
following:
• cleared
• occurred
condition
The IPSLA reaction type. reaction_type
The IPSLA destination IP address.
dest_ip_address
The IPSLA configured rising threshold value. threshold rising
The IPSLA configured falling threshold value.
threshold falling
The measured threshold value of the IPSLA operation. measured_threshold_value
Corresponds to the argument of the threshold type1. threshold_count1
Corresponds to the argument of the threshold type2. threshold_count2
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1903
event_register_ipsla