Cisco Catalyst 2960 Series, Configuration Manual

Page: 107 / 2288

Purpose Command or Action
(Optional) Configures a range of interfaces.
Interfaces configured in a range must be the same type and must
be configured with the same feature options. Note
interface range or interface range macro
Step 5
Displays a list of all interfaces on or configured for the switch. A report
is provided for each interface that the device supports or for the specified
interface. show interfaces Step 6
Adding a Description for an Interface
SUMMARY STEPS
1. enable
2.
configure terminal
3.
interface interface-id
4. description string
5.
end
6. show interfaces interface-id description
7. copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. Enter your password
if prompted. enable
Example:
Switch> enable
Step 1
Enters global configuration mode.
configure terminal
Example:
Switch#
configure terminal
Step 2
Specifies the interface for which you are adding a
description, and enter interface configuration mode. interface interface-id
Example:
Switch(config)# interface gigabitethernet1/0/2
Step 3
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
25
How to Configure Interface Characteristics