Cisco Catalyst 2960 Series, Configuration Manual

Page: 1993 / 2288

(Mandatory) The event-type (create, delete, update)
at which the event is rearmed to be monitored again. exit_event_type
(Mandatory) Specifies the event and its attributes to
monitor. Valid values are
event1 , event2 , event3 ,
and event4 .
The subevent keywords can be used alone, together,
or in any combination with each other, but each
keyword can be used only once.
event1- event4
(Optional) Maximum run time of the script (specified
in SSSSSSSSSS[.MMM] format, where SSSSSSSSSS
must be an integer representing seconds between 0
and 4294967295, inclusive, and where MMM must
be an integer representing milliseconds between 0
and 999). If this argument is not specified, the default
20-second run-time limit is used. maxrun
(Optional) Policy run-time priority setting. When the
nice argument is set to 1, the policy is run at a
run-time priority that is less than the default priority.
The default value is 0. nice
Subevent Syntax
field ? rate_interval ? event1 only entry_value ? entry_op eq|ge|gt|le|lt|wc
[exit_value ?] [exit_op eq|ge|gt|le|lt|wc] [exit_rate_interval ? event1 only]
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1911
event_register_nf