Cisco Catalyst 2960 Series, Configuration Manual

Page: 1515 / 2288

Purpose Command or Action
Enters interface configuration mode and specifies the
ingress Layer 2 or Layer 3 interface to be enabled for
web-based authentication. interface type slot/port
Example:
Switch(config)#
interface gigabitEthernet1/0/1
Step 4
type can be fastethernet, gigabit ethernet, or
tengigabitethernet.
Applies the default ACL. ip access-group name
Example:
Switch(config-if)# ip access-group webauthag
Step 5
Configures web-based authentication on the specified
interface. ip admission name
Example:
Switch(config-if)# ip admission webauth1
Step 6
Returns to configuration mode. exit
Example:
Switch(config-if)# exit
Step 7
Enables the IP device tracking table. ip device tracking
Example:
Switch(config)# ip device tracking
Step 8
Returns to privileged EXEC mode. end
Example:
Switch(config)# end
Step 9
Displays the configuration.
show ip admission status
Example:
Switch# show ip admission status
Step 10
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 11
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1433
How to Configure Web-Based Authentication