Cisco Catalyst 2960 Series, Configuration Manual

Page: 191 / 2288

Purpose Command or Action
Specifies the interface to be configured, and enter
interface configuration mode. interface interface-id
Example:
Switch(config)#
interface gigabitethernet1/0/1
Step 2
Enables EEE on the specified interface. When EEE is
enabled, the device advertises and autonegotiates EEE
to its link partner. power efficient-ethernet auto
Example:
Switch(config-if)# power efficient-ethernet auto
Step 3
Disables EEE on the specified interface. no power efficient-ethernet auto
Example:
Switch(config-if)#
no power efficient-ethernet
Step 4
auto
Returns to privileged EXEC mode.
end
Example:
Switch(config-if)# end
Step 5
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 6
Monitoring EEE
Table 12: Commands for Displaying EEE Settings
Purpose Command
Displays EEE capabilities for the specified interface. show eee capabilities interface interface-id
Displays EEE status information for the specified interface. show eee status interface interface-id
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
109
Monitoring EEE