Cisco Catalyst 2960 Series, Configuration Manual

Page: 549 / 2288

Purpose Command or Action
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch#
copy running-config
Step 7
startup-config
Monitoring SNMP Status
To display SNMP input and output statistics, including the number of illegal community string entries, errors,
and requested variables, use the
show snmp privileged EXEC command. You also can use the other privileged
EXEC commands listed in the table to display SNMP information.
Table 50: Commands for Displaying SNMP Information
Purpose Command
Displays SNMP statistics. show snmp
Displays information on the local SNMP engine and all remote
engines that have been configured on the device.
Displays information on each SNMP group on the network. show snmp group
Displays information on pending SNMP requests. show snmp pending
Displays information on the current SNMP sessions. show snmp sessions
Displays information on each SNMP user name in the SNMP
users table.
You must use this command to display SNMPv3
configuration information for
auth | noauth | priv mode.
This information is not displayed in the show
running-config output.
Note
show snmp user
Related Topics
Disabling the SNMP Agent, on page 452
SNMP Agent Functions, on page 449
Configuring SNMP Groups and Users, on page 456
SNMP Configuration Guidelines, on page 451
Configuring SNMP Notifications, on page 459
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
467
Monitoring SNMP Status