Cisco Catalyst 2960 Series, Configuration Manual

Page: 1012 / 2288

Purpose Command or Action
Verifies your entries. show running-config
Example:
Switch#
show running-config
Step 8
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch# copy running-config
Step 9
startup-config
Defining AAA Server Groups
You use the
server
group server configuration command to associate a particular server with a defined group
server. You can either identify the server by its IP address or identify multiple host instances or entries by
using the optional
auth-port and acct-port keywords.
Follow these steps to define AAA server groups:
SUMMARY STEPS
1.
enable
2. configure terminal
3.
radius server name
4. address { ipv4 | ipv6 } { ip-address | hostname } auth-port port-number acct-port port-number
5. end {{ 0 | 7 } string } string
6.
end
7. show running-config
8.
copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. Enter your password if
prompted. enable
Example:
Switch> enable
Step 1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
930
How to Configure RADIUS