Cisco Catalyst 2960 Series, Configuration Manual

Page: 1748 / 2288

show event manager policy available command and the show event manager policy registered
command have been enhanced to add the description keyword to display the description of the registered
applet.
• Enables EEM policies to bypass AAA authorization--The event manager application command has
been enhanced to provide authorization and bypass keywords to disable AAA.
• Introduces CLI Library enhancements--Provides two new commands in the CLI library: cli_run and
cli_run_interactive .
Embedded Event Manager 3.2
EEM 3.2 introduced the following new event detectors:
• Neighbor Discovery--Neighbor Discovery event detector provides the ability to publish a policy to
respond to automatic neighbor detection when:
• a Cisco Discovery Protocol (CDP) cache entry is added, deleted or updated.
• a Link Layer Discovery Protocol (LLDP) cache entry is added, deleted, or updated.
• an interface link status changes.
• an interface line status changes.
• Identity--Identity event detector generates an event when AAA authorization and authentication is
successful, when failure occurs, or after normal user traffic on the port is allowed to flow.
• Mac-Address-Table--Mac-Address-Table event detector generates an event when a MAC address is
learned in the MAC address table.
The Mac-Address-Table event detector is supported only on switch platforms and can be used only on
Layer 2 interfaces where MAC addresses are learned. Layer 3 interfaces do not learn addresses and devices
do not usually support the mac-address-table infrastructure needed to notify EEM of a learned MAC
address.
Note
EEM 3.2 also introduces new CLI commands to support the applets to work with the new event detectors.
Embedded Event Manager 4.0
EEM 4.0 introduces the following new features:
• EEM Email Action Enhancements
•
TLS support for SMTP mail actions
—
The new optional secure keyword is added to the action
mail CLI with tls and none keyword options. There are no updates to the corresponding Tcl Policy.
• Custom port for SMTP mail actions — The new optional port keyword is added to the action mail
CLI. In the Tcl policy, the port number can be specified by adding a line to the e-mail template.
• EEM Security Enhancements
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1666
Information About Embedded Event Manager