Cisco Catalyst 2960 Series, Configuration Manual

Page: 1554 / 2288

Purpose Command or Action
Storm control is supported on physical interfaces. You can
also configure storm control on an EtherChannel. When storm
small-frame
control is configured on an EtherChannel, the storm control
settings propagate to the EtherChannel physical interfaces.
Enters interface configuration mode, and specify the interface
to be configured. interface interface-id
Example:
Switch(config)# interface
Step 6
gigabitethernet1/0/2
Configures the threshold rate for the interface to drop
incoming packets and error disable the port. The range is 1 to
10,000 packets per second (pps) small-frame violation-rate pps
Example:
Switch(config-if)# small-frame violation rate
Step 7
10000
Returns to privileged EXEC mode. end
Example:
Switch(config)#
end
Step 8
Verifies the configuration. show interfaces interface-id
Example:
Switch# show interfaces gigabitethernet1/0/2
Step 9
Verifies your entries.
show running-config
Example:
Switch# show running-config
Step 10
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 11
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1472
How to Configure Storm Control