Cisco Catalyst 2960 Series, Configuration Manual

Page: 1528 / 2288

Purpose Command or Action
Verifies your entries. show running-config
Example:
Switch#
show running-config
Step 6
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 7
Removing Web-Based Authentication Cache Entries
Follow these steps to remove web-based authentication cache entries:
SUMMARY STEPS
1.
enable
2. clear ip auth-proxy cache { * | host ip address }
3.
clear ip admission cache { * | host ip address }
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. Enter your password if
prompted. enable
Example:
Switch> enable
Step 1
Delete authentication proxy entries. Use an asterisk to delete all
cache entries. Enter a specific IP address to delete the entry for
a single host. clear ip auth-proxy cache { * | host ip address }
Example:
Switch# clear ip auth-proxy cache
Step 2
192.168.4.5
Delete authentication proxy entries. Use an asterisk to delete all
cache entries. Enter a specific IP address to delete the entry for
a single host. clear ip admission cache { * | host ip address }
Example:
Switch# clear ip admission cache 192.168.4.5
Step 3
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1446
How to Configure Web-Based Authentication