Purpose
Command or Action
Sets conditions in a named IP access list that denies packets.
deny protocol host host-address any eq port
Example:
Device(config-ext-nacl)# deny tcp host
172.16.2.88 any eq telnet
Step 5
Exits extended named access list configuration mode and
enters privileged EXEC mode.
end
Example:
Device(config-ext-nacl)# end
Step 6
Configuring Time Ranges for ACLs
Follow these steps to configure a time-range parameter for an ACL:
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
time-range time-range-name
4.
Use one of the following:
•
absolute
[
start time date
] [
end time date
]
•
periodic day-of-the-week hh:mm to
[
day-of-the-week
]
hh:mm
•
periodic
{
weekdays
|
weekend
|
daily
}
hh:mm to hh:mm
5.
end
6.
show running-config
7.
copy running-config startup-config
DETAILED STEPS
Purpose
Command or Action
Enables privileged EXEC mode. Enter your password if
prompted.
enable
Example:
Switch(config)#
enable
Step 1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1200
How to Configure ACLs
Summary of Contents for Catalyst 2960 Series
