Cisco Catalyst 2960 Series, Configuration Manual

Page: 1795 / 2288

Purpose Command or Action
Exits global configuration mode and returns to privileged
EXEC mode. exit
Example:
Device(config)# exit
Step 4
Holding a Scheduled EEM Policy Event or Event Queue
To hold a scheduled EEM policy event or event queue in the EEM scheduler, perform this task. In this task,
all pending EEM policies are displayed. A policy identified using a job ID of 2 is held in the EEM scheduler,
and the final step shows that the policy with a job ID of 2 has changed status from pending to held.
SUMMARY STEPS
1.
enable
2.
show event manager policy pending
[
queue-type
{
applet
|
call-home
|
axp
|
script
}
class class-options
|
detailed
]
3. event manager scheduler hold { all | policy job-id | queue-type { applet | call-home | axp | script } class
class-options } [ processor { rp_primary | rp_standby }]
4. show event manager policy pending [ queue-type { applet | call-home | axp | script } class class-options
| detailed
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. enable Step 1
Example:
Device> enable
• Enter your password if prompted.
Displays the pending EEM policies. show event manager policy pending [ queue-type { applet |
call-home | axp | script } class class-options | detailed ]
Step 2
Example:
Device# show event manager policy pending
Holds a scheduled EEM policy event or event queue
in the EEM scheduler. event manager scheduler hold { all | policy job-id | queue-type
{ applet | call-home | axp | script } class class-options } [ processor
{ rp_primary | rp_standby }]
Step 3
• In this example, a policy with a job ID of 2 is
put on hold.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1713
How to Write EEM Policies Using the Cisco IOS CLI