Cisco Catalyst 2960 Series, Configuration Manual

Page: 117 / 2288

Purpose Command or Action
Restarts an interface. no shutdown
Example:
Switch(config-if)#
no shutdown
Step 5
Returns to privileged EXEC mode. end
Example:
Switch(config-if)# end
Step 6
Verifies your entries. show running-config
Example:
Switch#
show running-config
Step 7
Configuring the Console Media Type
Follow these steps to set the console media type to RJ-45. If you configure the console as RJ-45, USB console
operation is disabled, and input comes only through the RJ-45 connector.
This configuration applies to all switches in a stack.
SUMMARY STEPS
1.
enable
2. configure terminal
3.
line console 0
4. media-type rj45
5. end
6.
copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. Enter your password if
prompted. enable
Example:
Switch>
enable
Step 1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
35
How to Configure Interface Characteristics