Cisco Catalyst 2960 Series, Configuration Manual

Page: 744 / 2288

Examples: Auto-QoS Generated Configuration For Enhanced Video, Trust, and Classify Devices
If you entered the following enhanced auto-QoS commands, the switch configures a CoS-to-DSCP map (maps
CoS values in incoming packets to a DSCP value):
• auto qos video cts
• auto qos video ip-camera
• auto qos video media-player
• auto qos trust
• auto qos trust cos
•
auto qos trust dscp
The following command is initiated after entering one of the above auto-QoS commands:
Switch(config)# mls qos map cos-dscp 0 8 16 24 32 46 48 56
No class maps and policy maps are configured.
Note
If you entered the auto qos classify command, the switch automatically creates class maps and policy maps
(as shown below).
Switch(config)# mls qos map policed-dscp 0 10 18 24 26 46 to 8
Switch(config)# mls qos map cos-dscp 0 8 16 24 32 46 48 56
Switch(config)# class-map match-all AUTOQOS_MULTIENHANCED_CONF_CLASS
Switch(config-cmap)#
match access-group name AUTOQOS-ACL-MULTIENHANCED-CONF
Switch(config)# class-map match-all AUTOQOS_DEFAULT_CLASS
Switch(config-cmap)# match access-group name AUTOQOS-ACL-DEFAULT
Switch(config)# class-map match-all AUTOQOS_TRANSACTION_CLASS
Switch(config-cmap)#
match access-group name AUTOQOS-ACL-TRANSACTIONAL-DATA
Switch(config)#
class-map match-all AUTOQOS_SIGNALING_CLASS
Switch(config-cmap)# match access-group name AUTOQOS-ACL-SIGNALING
Switch(config)# class-map match-all AUTOQOS_BULK_DATA_CLASS
Switch(config-cmap)# match access-group name AUTOQOS-ACL-BULK-DATA
Switch(config)#
class-map match-all AUTOQOS_SCAVANGER_CLASS
Switch(config-cmap)# match access-group name AUTOQOS-ACL-SCAVANGER
Switch(config)# policy-map AUTOQOS-SRND4-CLASSIFY-POLICY
Switch(config-pmap)# class AUTOQOS_MULTIENHANCED_CONF_CLASS
Switch(config-pmap-c)# set dscp af41
Switch(config-pmap)#
class AUTOQOS_BULK_DATA_CLASS
Switch(config-pmap-c)# set dscp af11
Switch(config-pmap)# class AUTOQOS_TRANSACTION_CLASS
Switch(config-pmap-c)# set dscp af21
Switch(config-pmap)# class AUTOQOS_SCAVANGER_CLASS
Switch(config-pmap-c)#
set dscp cs1
Switch(config-pmap)# class AUTOQOS_SIGNALING_CLASS
Switch(config-pmap-c)# set dscp cs3
Switch(config-pmap)# class AUTOQOS_DEFAULT_CLASS
Switch(config-pmap-c)#
set dscp default
;
Switch(config-if)#
service-policy input AUTOQOS-SRND4-CLASSIFY-POLICY
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
662
Configuration Examples for Auto-Qos