Cisco Catalyst 2960 Series, Configuration Manual

Page: 780 / 2288

SUMMARY STEPS
1.
configure terminal
2. interface Interface_type stack/module/port
3.
ipv6 nd raguard [ attach-policy policy_name [ vlan { vlan_ids | add vlan_ids | except vlan_ids | none |
remove vlan_ids | all } ] | vlan [ { vlan_id s | add vlan_ids | exceptvlan_ids | none | remove vlan_ids |
all } ]
4.
do show running-config
DETAILED STEPS
Purpose Command or Action
Enters the global configuration mode. configure terminal
Example:
Switch# configure terminal
Step 1
Specifies an interface type and identifier; enters the
interface configuration mode. interface Interface_type stack/module/port
Example:
Switch(config)# interface gigabitethernet 1/1/4
Step 2
Attaches the Neighbor Discovery Inspection policy
to the interface or the specified VLANs on that ipv6 nd raguard [ attach-policy policy_name [ vlan { vlan_ids |
add vlan_ids | except vlan_ids | none | remove vlan_ids | all } ]
Step 3
interface. The default policy is attached if the
attach-policy option is not used.
| vlan [ { vlan_id s | add vlan_ids | exceptvlan_ids | none | remove
vlan_ids | all } ]
Example:
Switch(config-if)#
ipv6 nd raguard attach-policy
example_policy
or
Switch(config-if)# ipv6 nd raguard attach-policy
example_policy vlan 222,223,224
or
Switch(config-if)# ipv6 nd raguard vlan 222, 223,224
Confirms that the policy is attached to the specified
interface without exiting the configuration mode.
do show running-config
Example:
Switch#(config-if)#
do show running-config
Step 4
Related Topics
Information about First Hop Security in IPv6, on page 678
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
698
How to Configure an IPv6 Router Advertisement Guard Policy