Cisco Catalyst 2960 Series, Configuration Manual

Page: 151 / 2288

Purpose Command or Action
Returns to global configuration mode. exit
Example:
Switch(config)#
exit
Step 5
Specifies the interface on which you are configuring a network-policy
profile, and enter interface configuration mode. interface interface-id
Example:
Switch (config)# interface
Step 6
gigabitethernet2/0/1
Specifies the network-policy profile number. network-policy profile number
Example:
Switch(config-if)# network-policy 1
Step 7
Specifies the network-policy TLV.
lldp med-tlv-select network-policy
Example:
Switch(config-if)# lldp med-tlv-select
Step 8
network-policy
Returns to privileged EXEC mode. end
Example:
Switch(config)# end
Step 9
Verifies the configuration. show network-policy profile
Example:
Switch#
show network-policy profile
Step 10
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch# copy running-config
Step 11
startup-config
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
69
How to Configure LLDP, LLDP-MED, and Wired Location Service