Cisco Catalyst 2960 Series, Configuration Manual

Page: 2037 / 2288

(Optional) Policy run-time priority setting. When the
nice argument is set to 1, the policy is run at a
run-time priority that is less than the default priority.
The default value is 0. nice
An EEM policy that registers for a timer event or a counter event can act as both publisher and subscriber.
Note
Result String
None
Set _cerrno
No
Event_reqinfo
"event_id %u event_type %u event_type_string {%s} event_pub_sec %u event_pub_msec %u"
"timer_type %s timer_time_sec %ld timer_time_msec %ld"
"timer_remain_sec %ld timer_remain_msec %ld"
Description Event Type
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id. event_id
Type of event.
event_type
An ASCII string that represents the name of the event
for this event type. event_type_string
The time, in seconds and milliseconds, when the event
was published to the EEM.
event_pub_sec event_pub_msec
Type of the timer. Can be one of the following:
• watchdog
• countdown
• absolute
timer_type
Time when the timer expired. timer_time_sec timer_time_msec
The remaining time before the next expiration.
timer_remain_sec timer_remain_msec
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1955
event_register_timer_subscriber