Cisco Catalyst 2960 Series, Configuration Manual

Page: 1697 / 2288

SUMMARY STEPS
1.
configure terminal
2. diagnostic schedule switch number test { name | test-id | test-id-range | all | basic | non-disruptive |}
{ daily | on mm dd yyyy hh:mm | weekly day-of-week hh:mm }
DETAILED STEPS
Purpose Command or Action
Enters global configuration mode. configure terminal
Example:
Switch# configure terminal
Step 1
Schedules on-demand diagnostic tests for a specific day and time. diagnostic schedule switch number test
{ name | test-id | test-id-range | all | basic |
Step 2
The
switch number
keyword is supported only on stacking switches. The
range is from 1 to 8.
non-disruptive |} { daily | on mm dd yyyy
hh:mm | weekly day-of-week hh:mm }
When specifying the tests to be scheduled, use these options:
Example:
Switch(config)# diagnostic schedule
•
name
—
Name of the test that appears in the show diagnostic content
command output.
switch 1 test 1-5 on July 3 2013 23:10
• test-id — ID number of the test that appears in the
show diagnostic
content
command output.
•
test-id-range
—
ID numbers of the tests that appear in the show
diagnostic content command output.
•
all
— All test IDs.
•
basic
—
Starts the basic on-demand diagnostic tests.
• non-disruptive — Starts the non-disruptive test suite.
You can schedule the tests as follows:
• Daily — Use the daily hh:mm parameter.
•
Specific day and time
—
Use the on mm dd yyyy hh:mm parameter.
• Weekly — Use the weekly day-of-week hh:mm parameter.
Configuring Health-Monitoring Diagnostics
You can configure health-monitoring diagnostic testing on a Switch while it is connected to a live network.
You can configure the execution interval for each health-monitoring test, enable the Switch to generate a
syslog message because of a test failure, and enable a specific test.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1615
How to Configure Online Diagnostics