Cisco Catalyst 2960 Series, Configuration Manual

Page: 1420 / 2288

• If the port is in closed authentication mode, the auth-default-ACL is created.
The access control entries (ACEs) in the fallback ACL are converted to per-user entries. If the configured
fallback profile does not include a fallback ACL, the host is subject to the auth-default-ACL associated with
the port.
If you use a custom logo with web authentication and it is stored on an external server, the port ACL must
allow access to the external server before authentication. You must either configure a static port ACL or
change the auth-default-ACL to provide appropriate access to the external server.
Note
Cisco Secure ACS and Attribute-Value Pairs for the Redirect URL
The switch uses these cisco-av-pair VSAs:
• url-redirect is the HTTP or HTTPS URL.
• url-redirect-acl is the switch ACL name or number.
The switch uses the CiscoSecure-defined-ACL attribute value pair to intercept an HTTP or HTTPS request
from the end point. The switch then forwards the client web browser to the specified redirect address. The
url-redirect AV pair on the Cisco Secure ACS contains the URL to which the web browser is redirected. The
url-redirect-acl attribute value pair contains the name or number of an ACL that specifies the HTTP or HTTPS
traffic to redirect.
Note
• Traffic that matches a permit ACE in the ACL is redirected.
• Define the URL redirect ACL and the default port ACL on the switch.
If a redirect URL is configured for a client on the authentication server, a default port ACL on the connected
client switch port must also be configured.
Cisco Secure ACS and Attribute-Value Pairs for Downloadable ACLs
You can set the CiscoSecure-Defined-ACL Attribute-Value (AV) pair on the Cisco Secure ACS with the
RADIUS cisco-av-pair vendor-specific attributes (VSAs). This pair specifies the names of the downloadable
ACLs on the Cisco Secure ACS with the #ACL#-IP-name-number attribute.
• The name is the ACL name.
• The number is the version number (for example, 3f783768).
If a downloadable ACL is configured for a client on the authentication server, a default port ACL on the
connected client switch port must also be configured.
If the default ACL is configured on the switch and the Cisco Secure ACS sends a host-access-policy to the
switch, it applies the policy to traffic from the host connected to a switch port. If the policy does not apply,
the switch applies the default ACL. If the Cisco Secure ACS sends the switch a downloadable ACL, this ACL
takes precedence over the default ACL that is configured on the switch port. However, if the switch receives
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1338
Information About 802.1x Port-Based Authentication