Cisco Catalyst 2960 Series, Configuration Manual

Page: 149 / 2288

Purpose Command or Action
Specifies the TLV to enable. lldp med-tlv-select
Example:
Switch(config-if)#
lldp med-tlv-select
Step 4
inventory management
Returns to privileged EXEC mode.
end
Example:
Switch(config-if)# end
Step 5
(Optional) Saves your entries in the configuration file. copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 6
Configuring Network-Policy TLV
SUMMARY STEPS
1.
enable
2. configure terminal
3. network-policy profile profile number
4. {
voice
|
voice-signaling
}
vlan
[ vlan-id {
cos cvalue
|
dscp dvalue
}] | [[
dot1p
{
cos cvalue
|
dscp dvalue
}]
| none | untagged ]
5. exit
6. interface interface-id
7.
network-policy profile number
8. lldp med-tlv-select network-policy
9.
end
10.
show network-policy profile
11. copy running-config startup-config
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. Enter your password if prompted. enable Step 1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
67
How to Configure LLDP, LLDP-MED, and Wired Location Service